·Use high-quality copper material for heat treatment and has a good heat dissipation effect.
·With high efficiency LED Lighting scource,Low light decay,long lifespan.
·PC Lenses,make the light soft,Anti-glare design, Uniform distribution of light.
·High Color rendering index Ra>80,Color Temperature 5500K,Meet the requirements of professional match lighting .
·Waterproof IP67,Anti-wind level 17,could be work in the bad weather .
·Independent power box design is beneficial to the lamp house heat dissipation , reducing the light attenuation and extending the lifespan of the light source.
·bracket is equipped with 180 adjustable Angle, which is more convenient to be installed in different area.
·Applications: basketball court, football field, tennis court, golf course, swimming pool, volleyball etc.
| 500w stadium lights |
Item NO: TLA-500A |
|
Application |
Basketball court, soccer field , tennis course , golf course, volleyball court etc. |
| Mounted Type |
pole mounted |
| Parameter |
Voltage |
AC100-240V |
| Power |
400W |
| Power Factor |
≦0.9 |
| CCT |
2700-6500K |
| luminous Flux |
42500±5% |
| Beam Angle |
10°/15°/60° |
| IP Level |
IP65 |
| Insulation class |
I |
| Operating Temperature |
-30~50° |
| Lifespan |
50000H |
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precau ons should
always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. This product is used in areas with no electrical supply and/or
areas with good climatology. Can be used in a wide range of
places, such as roads, walking paths, parking lots, gardens,
residen al districts, etc.
2. When installing, be sure that the light can perfectly reach to the
panel light and is not blocked by any element such as buildings or
trees.
3. To avoid the possibility of electrical shock, turn o power supply
before install or during maintenance. It must be performed by
qualified personnel.
4. Product must be installed in accordance with your local electrical
code. If you are not familiar with these codes and requirements,
consult a qualified electrician.
5. Do not change the structure or any commponents of the
fixture
to ensure safety.
|
Model No.
|
Power
|
Dimensions
|
Weight
|
|
WS-LED-10
|
10W
|
502*295*65MM
|
5.3kg
|
|
WS-LED-15
|
15W
|
704*295*145mm
|
7.5kg
|
|
WS-LED-20-25
|
20W/25w
|
886*295*145mm
|
10.2kg
|
|
WS-LED-30-40
|
30W/40w
|
1114*295*145mm
|
15kg
|
|
SF-LED-50
|
50W
|
1114*420*145mm
|
18kg
|
|
SF-LED-60
|
60W
|
1114*420*145mm
|
19kg
|
SAVE THIS INSTRUCTIONS FOR FUTURE
REFERENCE INSTALLATION:
STANDARD MOUNTING
(Can be used in 10W/15W/20W)
STEP 1:
socket As shown in Diagram2, connect
the screw (M8*50MM) with nut (M8)
throughthe staple bolt, do not ghten.
STEP 2:
pole As shown in Diagram3, set the lamp
into the nut*¹ screw*² *¹ Nut: M8*² Screw:
M8x50mm body 2 light pole.
STEP 3:
As shown in Diagram4, adjust the body
to the appropriate loca on using No.14
wrench and 6mm Allen wrench with the
torque of body 15NM, then ghten the
crews.
STEP 4:
As shown in Diagram 5, installa on is
completed.
This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use
the return and collec on systems or contact the retailer where the product was purchased. They
can take this product for environmental safe recycling.
STEP 1:
As shown in Diagram6, a er the lamp is
installed on the pole (installa on way
referred to the procedure used in 10w/
15w/20w),
connect the screw (M8*50MM)
with nut (M8)
through brace strut and
fastenings, do not
ghten; connect the
screw (M8*50MM)
with nut (M8) through
suppor ng hoop
component and brace
strut, do not ghten.
STEP 2:
As shown in Diagram7, connect the
screw
(M8*50MM) with nut(M8) through
brace
strut and suppor ng hoop
component, do
not ghten
STEP 3:
As shown in Diagram8, ghten the
screws using No.14 wrench and 6mm
Allen
wrench with the torque of 15NM.
STEP 4:
As shown in Diagram9, installa
on is
completed.
|
