Detailed introduction
Solar energy integration light is integrated solar product, simple structure combines the best green energy portfolio of today (solar, semiconductors led light source, lithium iron phosphate batteries). Intelligent PIR motion sensor system to achieve low power consumption, long lightingtime,high-brightness,long lifespan maintenance-free. meanwhile delivery and installation is very convenient.
Usage:
Installed in various traffic roads, secondary Road, residential roads, yards, mining and the place where is difficult to connect to city electricity, park lighting, parking lot etc. providing illumination, solar panel supply electricity for restoring in battery to ensure the lighting.
Products structure:
Formed by Integrated modular lighting (built-in : high efficient solar cell components, large volume lithium battery, micro-processor MPPT intelligent controller, high brightness Led light source) and lamp pole
Working theory:
In day the sun solar panels generate electricity, via the control function, solar panels for battery charging, LED lights automatically light up at night, ( human body motion sensor mode, reducing power consumption) by LED lamp lights on to illuminate the road.
|
60W Integrated Solar Street Light
|
Model: WS-660
|
|
Solar Panel
|
Max Power
|
18V70W(22% High efficiency US SUNPOWER Mono-Crystalline Solar Cell)
|
 |
|
Life time
|
25 Years
|
|
Battery
|
Type
|
Lithium Iron Phosphate Battery (LiFEPO4) / 12.8V、42AH
|
|
Life Time
|
5 Years
|
|
LED Street Light Head
(PIR Sensor Control)
|
Max Power
|
60W
|
|
Led Chip Brand
|
Bridgelux from USA with High Brightness
|
|
Lumen (LM)
|
5700-6000lm
|
|
Life Time
|
50000 Hours
|
|
Beam Angle
|
120°X60°
|
|
Charge Time
|
By Sun
|
8Hours (With enough intensity sunshine)
|
|
Discharge Time
|
Full Power
|
More than 11Hours
|
|
Saving Mode
|
More than 22Hours
|
|
Working Temperature
|
Range( ℃ )
|
-30℃~+60℃
|
|
Color Temperature
|
Range(K)
|
5500-6000K
|
|
Mounting Height
|
Range (M)
|
8-9M
|
|
Poles Distance
|
Range (M)
|
26-28M
|
|
Lamp Housing Material
|
Aluminium Alloy
|
|
Certificate
|
CE / ROHS / IP65
|
|
Warranty Period
|
3 Years
|
|
Packing & Weight
|
Product Size
|
1114*420*118mm
|
|
Product Weight
|
22.5 KGS
|
|
Carton Size
|
1160*480*185 mm
|
|
QTY/CTN
|
1 SET/CTN
|
|
G.W. for Carton
|
23.5 KGS
|
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precau ons should
always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. This product is used in areas with no electrical supply and/or
areas with good climatology. Can be used in a wide range of
places, such as roads, walking paths, parking lots, gardens,
residen al districts, etc.
2. When installing, be sure that the light can perfectly reach to the
panel light and is not blocked by any element such as buildings or
trees.
3. To avoid the possibility of electrical shock, turn o power supply
before install or during maintenance. It must be performed by
qualified personnel.
4. Product must be installed in accordance with your local electrical
code. If you are not familiar with these codes and requirements,
consult a qualified electrician.
5. Do not change the structure or any commponents of the
fixture
to ensure safety.
|
Model No.
|
Power
|
Dimensions
|
Weight
|
|
WS-LED-10
|
10W
|
502*295*65MM
|
5.3kg
|
|
WS-LED-15
|
15W
|
704*295*145mm
|
7.5kg
|
|
WS-LED-20-25
|
20W/25w
|
886*295*145mm
|
10.2kg
|
|
WS-LED-30-40
|
30W/40w
|
1114*295*145mm
|
15kg
|
|
SF-LED-50
|
50W
|
1114*420*145mm
|
18kg
|
|
SF-LED-60
|
60W
|
1114*420*145mm
|
19kg
|
SAVE THIS INSTRUCTIONS FOR FUTURE
REFERENCE INSTALLATION:
STANDARD MOUNTING
(Can be used in 10W/15W/20W)
STEP 1:
socket As shown in Diagram2, connect
the screw (M8*50MM) with nut (M8)
throughthe staple bolt, do not ghten.
STEP 2:
pole As shown in Diagram3, set the lamp
into the nut*¹ screw*² *¹ Nut: M8*² Screw:
M8x50mm body 2 light pole.
STEP 3:
As shown in Diagram4, adjust the body
to the appropriate loca on using No.14
wrench and 6mm Allen wrench with the
torque of body 15NM, then ghten the
crews.
STEP 4:
As shown in Diagram 5, installa on is
completed.
This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use
the return and collec on systems or contact the retailer where the product was purchased. They
can take this product for environmental safe recycling.
STEP 1:
As shown in Diagram6, a er the lamp is
installed on the pole (installa on way
referred to the procedure used in 10w/
15w/20w),
connect the screw (M8*50MM)
with nut (M8)
through brace strut and
fastenings, do not
ghten; connect the
screw (M8*50MM)
with nut (M8) through
suppor ng hoop
component and brace
strut, do not ghten.
STEP 2:
As shown in Diagram7, connect the
screw
(M8*50MM) with nut(M8) through
brace
strut and suppor ng hoop
component, do
not ghten
STEP 3:
As shown in Diagram8, ghten the
screws using No.14 wrench and 6mm
Allen
wrench with the torque of 15NM.
STEP 4:
As shown in Diagram9, installa
on is
completed.
|
